Oetiker® 14100500 (HIP 2000 | 500) Compound Action Pincer, Straight Handles, for 192 Low Profile Clamps

Oetiker® 14100500 (HIP 2000 | 500) Compound Action Pincer, Straight Handles, for 192 Low Profile Clamps

Oetiker® Clamp Installation Tools are suited for the proper installation of Oetiker® Ear Clamps.

Compound Action Hand Installation Pincer - Straight Handles. Oetiker® HIP 2000 | 500 are designed to produce the highest possible radial loads and uniformity around the circumference of the application, for the best hand installed clamp sealing performance. These Compound Action Pincers are especially designed for professional use where StepLess® Low Profile Clamps 192 are closed. The higher mechanical advantage allows the installer to apply lower hand forces, providing comfort and reduced risk of strain injury and fatigue.
The jaw tips are designed to precise tension hook requirements to optimize clamp assembly results. 36.0 mm wide jaw opening maximizes clamp closing range; 11.2 mm closed gap minimizes clamp over-tensioning.

Unique jaw: designed for StepLess® Low Profile Clamps 192
Suitable for: 1-wave and 3-wave clamp designs
Compound action mechanism: reduces hand force and increases mechanical advantage
Soft molded grips: improved operator control in oily environments
Proven construction: for long tool life
36.0 mm wide jaw opening: maximize clamp closing range
11.2 mm closing gap: minimize over-tensioning of clamp

TECHNICAL DATA OVERVIEW

Model No. HIP 2000 | 500
Item No. 14100500
Dimensions:
Length 230.0 mm
Width 54.0 mm
Height 22.0 mm
Weight 385.0 g
Jaw gap (open) 36.0 mm
Jaw gap (closed) 11.2 mm
Reference jaw force 2000 N (with hand force of 311 N at block closure)

Clamping Procedure: After assembling the hose, use an Oetiker® ear clamping tool to compress the clamp’s ear.  The clamp’s ear should be reduced in size by at least 40% to provide enough clamping force. If sized correctly, the clamp’s ear should not close completely during compression.